T-POD 6X Pro Trauma Pelvic Orthotic Device Pro

Description

Code: 11301

T-POD 6X Pro Trauma Pelvic Orthotic Device Pro

Instant pelvic stabilization product after therma (T-POD) by using its advanced mechanical pressure system, which converts 1 kilojoules of energy entering the lever of this product into 6 kilojoules of energy at the place of installation of this product, and by creating A uniform and controlled pressure in the pelvic area, while preventing internal bleeding in this area, prevents further movement of the bones in the fracture area and further damage to the vessels and arteries in the fracture area, and while increasing the patient’s survival probability to 50 It increases the percentage and prevents more damage to the patient. It can provide better fixation for complete and unstable hip fracture than other external fixators. Due to the existence of a series of extra parts on the product produced under the brand of Kioard, Danesh Banyan Sepid Tan Pernian Poish Company, it is possible that after pulling the handle and the pelvic fixator, long threads and the extra handle can be easily wrapped around the pins installed on the product. This important thing prevents excessive movement of the injured patient during the installation of the product and prevents disturbing the patient and the doctor. The flexibility of this product makes it possible to properly cover the patient’s pelvis.

Attributes:
• Small and light design and can be installed by one person
• One size fits all
• 100% non-representation by X-rays and uniform environmental pressure
• Creating controlled pressure, preventing excessive stiffness after closing.
• Can be used in emergency medicine and military medicine.
• Has a six-month warranty

Uses:
• Hip injury
• Hip stabilization
• In cases of suspected hip fracture
• Prevent internal pelvic bleeding
• Hip fracture and dislocation

Correct way of use:
1- Place the product under the patient’s pelvis while lying down. Gently rotate the patient with minimal force in the direction of placement of the pelvic stabilizer. Place the top edge of the product flat on the crown of the hip bone. Alternatively, the girdle can be centered at the level of the greater trochanters.
2- Adjust the gap in the pulley system by adjusting the length of the guide bar according to the patient’s hip circumference. The recommended distance range is 6-8 inches (15.2-20.3 cm).
3. Shorten or fold the edge of the stabilizer, leaving a 6-8 inch (15.2-20.3 cm) gap over the center of the pelvis. To create a distance, you can measure the distance. The gap should be set to the same gap as the pulley system.
As a second solution, you can provide a wide range when using the velcro adjustable reel system mentioned in step 3.
4- Attach the pulley system to a modified or folded side of the stabilizer. Then trim or fold the other edge of the stabilizer body and place the other side on it.
5- Slowly pull the tension tab and simultaneously create the necessary pressure.
6- Fasten the threads to the pins on the reel system.
7- Record the date and time of the request on the space provided.
8- The applied pressure should be released every 12 hours to check skin health and wound care if necessary. To retighten, pull the tab, tighten it, and attach it to the stabilizer body. The time to check the stabilizer should also be mentioned on the label.

Please read the following text before use.
• The suggested use may not be suitable for you, so always consult your doctor before use.
• Use this device only on healthy skin.
• Do not use this product if you have a specific allergy to the ingredients used in this product.
• The product must be closed in the declared manner.
• Make sure the product is not uncomfortably tight after closing and does not restrict blood flow to the area.
• Avoid using the product for long periods, for example, while sleeping.
• If you see pimples and skin redness at the place of use, or if your pain persists or worsens, stop using the product and consult your doctor.

Washing steps:
1- Wash gently with cold water and soap with moderate cleaning power.
2- Do not use a washing machine for washing and drying and avoid grabbing while washing.
3- Do not use bleaching liquid and bleaching chemicals when washing.
4- Dry the environment of the product using the usual air flow and place the product away from the heat source.

Materials used:
Nylon, polyester, linen, polyethylene

Sizing:
The product is one size and fits most hips between 18.5-56.29 inches (50-143 cm), so measure the circumference of the hip.

Warranty conditions:
Any tear, dirt, scratch, failure of zipper and glue before use is included in the warranty. This warranty does not cover problems caused by improper use, carelessness in maintenance, fire and washing with chemical detergents or any factor that can be controlled by humans.